With the ground-level infeed station with lift, transport units can be fed in or picked up using manual forklift trucks.

For the infeed of transport units, the infeed station is in its lower position at a conveying level of +75 mm to the floor level. Lifting is carried out by means of a chain drice with electric motor.

Of the three roller strips, the two outer ones are driven. The middle, non-driven roller strip is used to support the pallet.

Safety equipment

• One light barrier with evaluation unit, which stops the hoist motor if the light beam is interrupted
• Slipping clutch
• Stable infeed guide to protect  the roller conveyor